|
Spiral Stairs
(S-Series)
|
) S-72: Hand-carved dove-tailed ballusters into the ends of sculpted half log treads |
) S-72: Character center column with beetle tracks |
) S-84: Inset copper grab-rail with a circular framed opening |
) S-72: Hand-forged metal ballusters |
) S-72: Contrasting center column and ballusters with bark |
) S-84: Flared root base |
) S-96: Spiral stair with full round log ends |
) S-96: Massive center column, complimented with a stacked handrail, nicknamed "The Snow Man" |
) S-72: Exterior spiral with Treated Wood |
) S-72: Laminated oak treads |
) S-72: Character center column and worm wood ballusters |
) S-108: A code-conforming primary access stair |
|
Custom Stair Options
|
) Intricate dovetail joint |
) Circular framed opening |
) Custom carvings |
|
The Spiral Stair is StairMeister's signature product and is very often an architectural focal point in our clients' homes. Our stairs are constructed with unique log center columns, hand-sculpted log treads, individually-bent handrails with hand-hewn spindles that are typically dovetailed into the treads.
The Spiral Stair concept is to provide access to living space while using as little floor area as possible. In some parts of the country, building codes limit the use of a Spiral Stair to access 400 sq. ft. of living area or less. Please check with your local Building Department for applicable codes before ordering.
The following drawings are to 1/4" = 1' scale so they can be cut out and used on floor plans. Refer to Spiral Stairs - Specifications to determine the appropriate number of treads for your stairs. Allow 1 1/2" minimum hand clearance on all sides when framing stair wells. If the following pdf's do not print to size click here. |
S72.pdf |
S84.pdf
|
S96.pdf |
S108.pdf |
|
Spiral Stairs-Specifications |
|
S-72: UBC Conforming **
72" diameter Spiral Stair with 12" log center column and hand-carved log treads and balusters. 30" tread. Continuous hand rail on one side.
|
|
S-84: UBC Conforming**
84" diameter Spiral Stair with 12" log center column and hand-carved log treads and balusters. 36" tread. Continuous hand rail on one side.
|
|
S-96: UBC Conforming **
96" diameter Spiral Stair with 18" log center column and hand-carved log treads and balusters. 38" tread. Continuous hand rail on one side. 
|
|
S-108: UBC Conforming - General Access
108" diameter Spiral Stair with 16" log center column and hand-carved, laminated log treads supported by decorative knee braces. 46" treads. Continuous hand rail on both sides. 
|
|
**May be used as primary access for up to 400 sq. ft. per 1995 UBC. No restriction applies when spiral stair is used as a secondary exit. For a verbal quote, please speak to a StairMeister representative. For a written estimate, please send the following: floor plan, plan view of stair, floor framing plans for both levels, and a cross section through the house at the stair location If you have any questions, you can reach us at (303) 440-2994, or Fax (303) 440-0736.
|